Using Redundancy Protocols with G6 Devices

May 2019 - This document outlines the configurational steps that are typically needed to set up the redundancy protocols for operating redundant networks.

It also leads through example configurations (one or more) step-by-step, using hands-on scenarios. It builds on information provided by the Quick Installation Guide that is shipped with each MICROSENS G6 device and the document "Product Manual Firmware, Generation 6" that is included in each software archive and can also be downloaded from the Web Manager's link "Documentation" in the navigation bar. Additionally, prior knowledge of the foundations of IP Networks and Virtual LANs is required for the reader to benefit from this Application Note.